Customizing The Default Settings For Each Track Number - Akai MPC 4000 Reference Manual

B Time field
Selects the region of time for which the pitch will be transposed.
C [F1] key (CANCEL)
Cancels the operation and closes the popup window.
D [F4] key (ALL)
Transposes all INST type tracks by the value specified in the Transpose field of the Main
page.
E [F6] key (FIX)
Executes the transpose operation.
3. Move the cursor to the Transpose amount field, and turn the [JOG] dial to
specify the amount of transposition.
4. Move the cursor to the left Time field, and turn the [JOG] dial to specify the
starting location for the transposition.
5. Move the cursor to the right Time field, and turn the [JOG] dial to specify the
ending location for the transposition.
6. To execute the transposition, press the [F6] key (FIX).

Customizing the default settings for each track number

For each track number, you can independently specify the default settings (track type,
output destination, etc.) that will be used when you select an empty track.
For example, if you specify that track number 1 have a track name = Drums, type =
DRUM, output destination = part 1, and that track number 2 have a track name = Bass,
type = INST, output destination = part 2, you would be able to use the same track config-
uration every time you select a new sequence.
1. Select an empty track, move the cursor to the Track block, and set each field to
the values that you want to use as the defaults.
You can specify default values for the following settings of a track.
• Track type
• Amount of relative change for velocity/duration
• Program change on/off
• Output destination
• Mute on/off
2. Move the cursor to the Trk field, and press the [WINDOW] key.
The Track popup window will appear.
1
2
A Track name field
Indicates the name of the currently selected track.
B Trk field
Selects the track number for which you will specify default settings.
C Default name field
Specifies the default track name.
3. Move the cursor to the Trk field, and turn the [JOG] dial to select the track
number for which you want to specify default settings.
Main page
3
25