Akai MPC 4000 Reference Manual page 80

Song mode
5. To execute the deletion, press the [F6] key (DO IT).
The song you selected in step 4 will return to an empty state.
The window will close automatically when the deletion is completed.
Converting a song into a sequence
Here's how you can convert a completed song into a sequence. When you execute this
conversion, the sequences within the song will be combined by track number. This is con-
venient when you want to add solo parts to a completed song.
1. Move the cursor to the Song field, and turn the [JOG] dial to select the song
that you want to convert into a sequence.
2. Press the [F1] key or [F2] key (CONVERT TO SEQ).
The Convert Song to Sequence popup window will appear.
A From song field
Indicates the song that will be converted.
B To sequence field
Selects the sequence number for the resulting sequence.
C Track status field
Selects how processing will occur if the sequences in the song contain muted tracks.
D [F1] key (CANCEL)
Cancels the operation and closes the popup window.
E [F6] key (DO IT)
Executes the conversion.
3. Make sure that the song you want to convert into a song is selected in the From
song field.
4. Move the cursor to the To sequence field, and turn the [JOG] dial to select the
sequence number into which the song will be converted.
When the popup window first appears, the lowest-numbered vacant sequence will be
selected. If you select a sequence number that already contains events, the converted song
will be written over that sequence, replacing it.
5. Move the cursor to the Track status field, and turn the [JOG] dial select how the
tracks will be processed.
• REFERENCED TO 1ST SQ .......The settings for each track in the first sequence will
70
1
2
3
4
be assigned to the corresponding track of each fol-
lowing sequence.
5