Akai MPC 4000 Reference Manual page 157

Effect mode
PHASER+DELAY
This is a monaural composite effect that connects a phaser and delay in series.
Parameter
Rate
Depth
Feedback
Delay
Feedback
Bounce
Wet/Dry
Effect
PITCH CORRECTOR
This monaural effect corrects the pitch of the input signal in realtime.
Parameter
Ratio
Smoothing
Calibration
Scale
Key
Wet/Dry
Effect
* About the Scale parameter
The following scales can be selected for the Scale parameter.
148
Range
0.1Hz–10.0Hz Adjusts the LFO speed of the phaser effect.
0–127 Adjusts the LFO depth of the phaser effect.
0–127 Adjusts the amount of feedback for the phaser effect.
1ms–1500ms Adjusts the delay time of the delay effect.
0–127 Adjusts the amount of feedback for the delay effect.
ON/OFF Specifies whether the delay sound will be panned (ON).
Adjusts the balance of the effect sound and dry sound. (With a
100/0–0/100
setting of 100/0, only the effect sound is output.)
ON/OFF Switches the effect on/off.
Range
Adjusts the degree to which a pitch that falls outside the thresh-
0%–100%
old will be corrected.
Preserves the vibrato of the input signal in order to maintain a
0%–100%
more natural-sounding result.
No vibrato will remain if this is set to 100%. As you decrease
415Hz–466Hz
the setting, a more natural vibrato will appear.
*
Specifies the standard pitch.
C/C#...A#/B Selects the scale that will be used.
Adjusts the balance of the effect sound and dry sound. (With a
100/0–0/100
setting of 100/0, only the effect sound is output.)
ON/OFF Switches the effect on/off.
Scale parameter settings
CHROMA (Chromatic scale)
M (Major scale)
m (Minor scale)
m-HERM (Harmonic minor scale)
m-MELO (Melodic minor scale)
WHOLE (Whole tone scale)
BLUES (Blues scale)
ARAB (Arabian scale)
DORIAN (Dorian scale)
PHRYGI (Phrygian scale)
LYDIAN (Lydian scale)
MIXOLY (Mixolydian scale)
LOCRIA (Locrian scale)
Function
Function
C D E F G A B