Akai MPC 4000 Reference Manual page 155

Effect mode
NOISE GATE
This is a monaural effect that silences the signal if it drops below a specified level (thresh-
old). It is convenient to use this to cut any noise that may be heard while you are not play-
ing.
Parameter
Threshold
Key
Output
Attack
Release
Hold
Wet/Dry
Effect
PAN>AUTOPAN
This is an autopan effect that automatically moves the sound between left and right. It
can be used to give the sound a sense of movement and depth.
Parameter
Rate
Mode
Width
Rate
Wet/Dry
Effect
PAN>TRIGGERPAN
This is an autopan effect that starts when the signal of the specified effect bus A–D
exceeds a given level. You can also use the [F3] (MANUAL) key to start it manually.
Parameter
Rate
Mode
Trigger
Threshold
Width
Wet/Dry
Effect
146
Range
–60dB–0dB Adjusts the threshold of the noise gate.
SEND Specifies the signal source (send A–D) that will drive the noise
A–SEND gate.
–20dB–+20dB Adjusts the output level of the effect sound.
0–127 Adjusts the attack of the effect.
0–127 Adjusts the release of the effect.
0–127 Adjusts the hold time of the effect.
Adjusts the balance of the effect sound and dry sound. (With a
100/0–0/100
setting of 100/0, only the effect sound is output.)
ON/OFF Switches the effect on/off.
Range
0.1Hz–10.0Hz Adjusts the speed of panning.
...... Conventional autopan.
Pan
..... Simulates a sound that rotates counter-clockwise in
L>R
Pan/L>R/R>L
..... Simulates a sound that rotates clockwise in front of the
R>L
0–127 Adjusts the stereo width.
0.1Hz–10.0Hz Adjusts the width of panning.
Adjusts the balance of the effect sound and dry sound. (With a
100/0–0/100
setting of 100/0, only the effect sound is output.)
ON/OFF Switches the effect on/off.
L
Pan
L
L R
L
L R
Range
0.1Hz–10.0Hz Adjusts the speed of panning.
Selects the autopan effect. The effects are the same as in AUTO
Pan/L>R/R>L
PAN.
SEND A–SEND D Selects the signal source that will start autopan.
MANUAL Use the [F3] key to start autopan.
–60dB–0dB Adjusts the signal level that will start autopan.
0–127 Adjusts the width of panning.
Adjusts the balance of the effect sound and dry sound. (With a
100/0–0/100
setting of 100/0, only the effect sound is output.)
ON/OFF Switches the effect on/off.
Function
Function
front of the listener.
listener.
R
R
R
Function