Akai MPC 4000 Reference Manual page 100

Save mode
6. In the file list block, select the folder in which the data will be saved.
Hint: When you execute the Save operation, the file(s) will be saved in the folder that is selected in
the left side of the file list (i.e., the level whose contents are shown in the right side of the file list).
To save a single sample
7. To save a single sample, make sure that the appropriate sample is selected in
the sample list field, and press the [F6] key (DO IT).
The selected sample will be saved to the storage device.
To save multiple samples
8. To save two or more samples at once, press the [F5] key (MULTIPLE) after step 6.
The Save Multiple Samples popup window will appear.
A Replace same samples field
Specifies what will be done if an identically-named file exists in the save-destination.
B [F1] key (CANCEL)
Cancels the operation and closes the popup window.
C [F3] key (
Saves only tagged samples, and closes the popup window.
D [F4] key (MODIFY)
Saves only samples indicated by the * symbol, and closes the popup window.
E [F6] key (ALL)
Saves all samples, and closes the popup window.
9. Move the cursor to the Replace same samples field, and select one of the
following to specify what will be done if an identically-named file exists in the
save-destination.
YES ........................The saved data will overwrite the existing data.
NO..........................Identically-named data will not be saved.
10. According to the type of samples that you want to save, press the [F3] key (
TAGGED)–[F6] key (ALL).
The selected samples will be saved to the storage device.
90
1
2
TAGGED)
3 4 5