Copying Note Number Parameters To Another Note Number (Drum Programs) - Akai MPC 4000 Reference Manual

Copying note number parameters to another note number (Drum programs)

Here's how the contents of a specific note number in a drum program can be copied to
the desired note number of the desired drum program.
1. In the Key Group Mix page, move the cursor to the Note field and press the
[WINDOW] key.
The Copy Parameters popup window will appear.
3
4
A From program field
Selects the copy-source program.
B Note field (copy-source)
Select the copy-source note number.
C Pad field (copy-source)
Indicates the pad number that is assigned to the copy-source note number. If nothing is
assigned, this will indicate OFF.
D To program field
Selects the copy-destination program.
E Note field (copy-destination)
Selects the copy-destination note number.
F Pad field (copy-destination)
Indicates the pad number that is assigned to the copy-destination note number.
G [F1] key (CANCEL)
Cancels the operation and closes the popup window.
H [F6] key (DO IT)
Executes the copy.
2. Move the cursor to the From program field, and turn the [JOG] dial to select the
copy-source drum program.
3. Move the cursor to the copy-source Note field, and turn the [JOG] dial to select
the note number that you want to copy.
If a pad is assigned to the selected note number, the pad number will appear in the
copy-source Pad field.
4. Move the cursor to the To program field, and select the copy-destination
program.
5. Move the cursor to the copy-destination Note field, and turn the [JOG] dial to
select the copy-destination note number.
If you select a note number for which parameter settings have already been made, the set-
tings of the copy-source note number will overwrite the settings of the destination.
6. To execute the copy, press the [F6] key (DO IT).
2 1
7 5 6
Key group mix page
8
203