VPLS Feature Guide for EX9200 Switches
Purpose
Action
Example: Configuring System Logging on Logical Systems
178
Results
From configuration mode, confirm your configuration by entering the
A protocols bgp group internal-peers
configuration, repeat the instructions in this example to correct the configuration.
user@host# show logical-systems A protocols bgp group internal-peers
traceoptions {
file bgp-log size 10k files 2;
flag update detail;
}
Verification
Confirm that the configuration is working properly.
Verifying That the Trace Log File Is Operating
Make sure that events are being written to the log file.
user@host:A> show log bgp-log
Aug 12 11:20:57 trace_on: Tracing to "/var/log/A/bgp-log" started
This example shows how to configure system logging on logical systems and how to
view the logs.
Requirements on page 178
Overview on page 179
Configuration on page 179
Verification on page 180
Requirements
This example has the following requirements:
You must have the
view
Junos OS Release 11.4 or later.
command. If the output does not display the intended
privilege for the logical system.
show logical-systems
Copyright © 2016, Juniper Networks, Inc.