Any (Vpls Multihoming) - Juniper EX9200 Features Manual

VPLS Feature Guide for EX9200 Switches

any (VPLS Multihoming)

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
110
any;
[edit logical-systems logical-system-name routing-instances instance-name protocols vpls
multi-homing active-interface],
[edit logical-systems logical-system-name routing-instances instance-name protocols vpls
multi-homing site site-name active-interface],
[edit routing-instances instance-name protocols vpls multi-homing active-interface],
[edit routing-instances instance-name protocols vpls multi-homing site site-name
active-interface]
Statement introduced in Junos OS Release 7.5.
Specify that any multihomed interface can be used as the primary interface by the VPLS
site. Depending on the order in which interfaces are listed in the PE router's configuration,
the first operational interface in the set of configured interfaces is chosen to be the primary
interface.
NOTE: In the VPLS documentation, the word router in terms such as PE router
is used to refer to any device that provides routing functions.
For FEC 128, use the [edit routing-instances instance-name protocols vpls multi-homing
hierarchy level.
active-interface]
This is the default behavior.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Specifying an Interface as the Active Interface on page 68
primary on page 151
Copyright © 2016, Juniper Networks, Inc.