Vlan-Tagging - Juniper EX9200 Features Manual

VPLS Feature Guide for EX9200 Switches

vlan-tagging

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
164

vlan-tagging;

[edit interfaces interface-name],
[edit logical-systems logical-system-name interfaces interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Statement introduced in Junos OS Release 12.2 for ACX Series Universal Access Routers.
Statement introduced in Junos OS Release 13.2 for PTX Series Routers.
Statement introduced in Junos OS Release 14.1X53-D10 for the QFX Series.
For Fast Ethernet and Gigabit Ethernet interfaces, aggregated Ethernet interfaces
configured for VPLS, and pseudowire subscriber interfaces, enable the reception and
transmission of 802.1Q VLAN-tagged frames on the interface.
NOTE: On EX Series switches except for EX4300 and EX9200 switches, the
and
vlan-tagging
on the same interface. Interfaces on EX2200, EX3200, EX3300, EX4200,
and EX4500 switches are set to
factory configuration. EX6200 and EX8200 switch interfaces do not have a
default setting.
family
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
802.1Q VLANs Overview
vlan-id
Configuring a Layer 3 Subinterface (CLI Procedure)
Configuring Tagged Aggregated Ethernet Interfaces
Example: Configuring Layer 3 Subinterfaces for a Distribution Switch and an Access
Switch
statements cannot be configured
family ethernet-switching
family ethernet-switching by the default
Copyright © 2016, Juniper Networks, Inc.