Primary (Vpls Multihoming) - Juniper EX9200 Features Manual

primary (VPLS Multihoming)

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
primary interface-name;
[edit logical-systems logical-system-name routing-instances instance-name protocols vpls
multi-homing active-interface],
[edit logical-systems logical-system-name routing-instances instance-name protocols vpls
multi-homing site site-name active-interface],
[edit routing-instances instance-name protocols vpls multi-homing active-interface],
[edit routing-instances instance-name protocols vpls multi-homing site site-name
active-interface]
Statement introduced in Junos OS Release 7.5.
Specify the name of the multihomed interface to be used as the primary interface by the
VPLS site.
For FEC 128, use the
[edit routing-instances instance-name protocols vpls multi-homing
hierarchy level.
active-interface]
If you omit this statement, depending on the order in which interfaces are listed in the
PE router's configuration, the first operational interface in the set of configured interfaces
is chosen to be the primary interface.
NOTE: In the VPLS documentation, the word router in terms such as PE router
is used to refer to any device that provides routing functions.
—Name of the interface (for example,
interface-name
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Specifying an Interface as the Active Interface on page 68
any on page 110
Chapter 13: Configuration Statements
).
ge-0/1/0.1
151