Juniper EX9200 Features Manual page 198

VPLS Feature Guide for EX9200 Switches
Purpose
Action
Related
Documentation
180
If you are done configuring the device, commit the configuration.
2.
[edit]
user@host# commit
user@host# exit
Results
From configuration mode, confirm your configuration by entering the
command. If the output does not display the intended configuration, repeat the
instructions in this example to correct the configuration.
user@host# show logical-systems
lsys1 {
system {
syslog {
host 10.209.10.69 {
ftp critical;
}
allow-duplicates;
file lsys1-file1 {
daemon error;
firewall critical;
}
}
}
}
Verification
Confirm that the configuration is working properly.
Verifying That the System Log File Is Operating
Make sure that events are being written to the log file.
TIP: To make entries in the system log, you can use the
and then use the
-p firewall.crit -l lsys1 TEST
user@host> show log lsys1/lsys1-file1
Sep 7 14:15:46 host clear-log[2752]: logfile cleared
Sep 7 14:19:04 host logger: %-: firewall_crit: TEST
...
user@host> file show /var/logical-systems/lsys1/log/lsys1-file1
Sep 7 14:19:04 host logger: %-: firewall_crit: TEST
...
Introduction to Logical Systems
logger shell command. For example: logger -e "firewall_crit"
show logical-systems
command
start shell
Copyright © 2016, Juniper Networks, Inc.