Juniper EX9200 Features Manual page 78

VPLS Feature Guide for EX9200 Switches
Related
Documentation
60
For a list of hierarchy levels at which you can include the
statement summary section for this statement.
To enable static VPLS on a router, you need to either configure a virtual tunnel interface
(requires the router to have a tunnel services PIC) or you can configure a label switching
interface (LSI). To configure an LSI, include the
protocols vpls static-vpls]
Without a Tunnel Services PIC" on page
NOTE: Static pseudowires for VPLS using an LSI is supported on MX series
routers and EX Series switches only. For M series and T series routers, a tunnel
services PIC is required.
If you issue a
show vpls connections
next to their addresses in the command output.
Configuring VPLS Without a Tunnel Services PIC on page 55
no-tunnel-services
hierarchy level. For more information, see
55.
command, static neighbors are displayed with
statement, see the
static
statement at the
"Configuring VPLS
Copyright © 2016, Juniper Networks, Inc.
[edit
"SN"