Site-Range - Juniper EX9200 Features Manual

site-range

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
site-range number;
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
vpls],
[edit routing-instances routing-instance-name protocols vpls]
Statement introduced before Junos OS Release 7.4.
Specify an upper limit on the maximum site identifier that can be accepted to allow a
pseudowire to be brought up. Pseudowires cannot be established to sites with site
identifiers greater than the configured site range. If you issue the
command, such sites are displayed as OR (out of range).
—Maximum number of site identifiers. We recommend using the default value.
number
Range: 1 through 65,534
Default: 65,534
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring the Site Range on page 25
Chapter 13: Configuration Statements
show vpls connections
157