Juniper EX9200 Features Manual page 140

VPLS Feature Guide for EX9200 Switches
Required Privilege
Level
Related
Documentation
122
—SATSOP-E3–based Layer 2 VPN
satsop-e3
—SATSOP-T1–based Layer 2 VPN
satsop-t1
—SATSOP-T3–based Layer 2 VPN
satsop-t3
Default: For VPLS networks, the default encapsulation type is
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring the Local Site on PE Routers in Layer 2 VPNs
Configuring VPLS Routing Instances on page 21
Configuring Interfaces for Layer 2 Circuits
Configuring an MPLS-Based Layer 2 VPN (CLI Procedure)
ethernet .
Copyright © 2016, Juniper Networks, Inc.