Juniper EX9200 Features Manual page 162

VPLS Feature Guide for EX9200 Switches
Description
Options
Required Privilege
Level
Related
Documentation
144
Specify each of the PE routers participating in the VPLS domain. Configuring this
statement enables LDP for signaling VPLS.
NOTE: In the VPLS documentation, the word router in terms such as PE router
is used to refer to any device that provides routing functions.
—Specify the neighbor identifier for each PE router participating in the VPLS
neighbor-id
domain.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring LDP Signaling for VPLS on page 28
Copyright © 2016, Juniper Networks, Inc.