Juniper EX9200 Features Manual page 155

Options
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
explicit-mac-flush-message-options
following explicit MAC flush message options:
any-interface —(Optional) Send a MAC flush message when any customer-facing
attachment circuit interface goes down.
—(Optional) Send a MAC FLUSH-FROM-ME flush message to all provider
any-spoke
edge (PE) routers in the core when one of the spoke pseudowires between the
multitenant unit switch and the other network-facing provider edge (NPE) router goes
down, causing the multitenant unit switch to switch to this NPE router.
NOTE: This option has a similar effect in a VPLS multihoming environment
with multiple multitenant unit switches connected to NPE routers, where
both multitenant unit switches have pseudowires that terminate in a mesh
group with local-switching configured. If the
then both PE routers send MAC FLUSH-FROM-ME flush messages to all
PEs in the core.
—(Optional) Propagate MAC flush to the core.
propagate
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring VPLS Routing Instances on page 21
Configuring Interoperability Between BGP Signaling and LDP Signaling in VPLS on
page 15
Chapter 13: Configuration Statements
—(Optional) You can specify one or more of the
any-spoke
option is enabled,
137