Mesh-Group (Protocols Vpls) - Juniper EX9200 Features Manual

VPLS Feature Guide for EX9200 Switches

mesh-group (Protocols VPLS)

Syntax
Hierarchy Level
Release Information
Description
Options
140
mesh-group mesh-group-name {
interface interface-name;
l2vpn-id (as-number:id | ip-address:id);
local-switching;
mac-flush [ explicit-mac-flush-message-options ];
neighbor address {...};
peer-as all;
pseudowire-status-tlv hot-standby-vc-on;
route-distinguisher (as-number:id | ip-address:id);
vpls-id number;
vrf-export [ policy-names ];
vrf-import [ policy-names ];
vrf-target {
community;
import community-name;
export community-name;
}
}
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
vpls],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
vpls site site-name],
[edit routing-instances routing-instance-name protocols vpls],
[edit routing-instances routing-instance-name protocols vpls site site-name]
Statement introduced in Junos OS Release 9.0.
,
local-switching mac-tlv-receive
OS Release 9.3.
pseudowire-status-tlv and
,
route-distinguisher vrf-export
Release 11.2.
hot-standby-vc-on and interface interface-name
15.1R2.
Specify the virtual private LAN service (VPLS) mesh group. The statement options allow
you to specify each provider edge (PE) router that is a member of the mesh group. This
statement is also used in the configuration of inter-autonomous system (AS) VPLS with
media access control (MAC) operations.
NOTE: In the VPLS documentation, the word router in terms such as PE router
is used to refer to any device that provides routing functions.
—Name of the VPLS mesh group.
mesh-group-name
The remaining statements are explained separately.
, , and
mac-tlv-send peer-as
mac-flush options introduced in Junos OS Release 10.0.
, , and
vrf-import vrf-target
options introduced in Junos OS Release
options introduced in Junos
options introduced in Junos OS
Copyright © 2016, Juniper Networks, Inc.