No-Tunnel-Services - Juniper EX9200 Features Manual

no-tunnel-services

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.

no-tunnel-services;

[edit logical-systems logical-system-name protocols vpls static-vpls],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
vpls],
[edit protocols vpls static-vpls],
[edit routing-instances routing-instance-name protocols vpls]
Statement introduced in Junos OS Release 7.6.
Support for static VPLS added in Junos OS Release 10.2.
Configure VPLS on a router without a Tunnel Services PIC. Configuring the
no-tunnel-services statement creates a label-switched interface (LSI) to provide VPLS
functionality. An LSI MPLS label is used as the inner label for VPLS. This label maps to
a VPLS routing instance. On the PE router, the LSI label is stripped and then mapped to
a logical LSI interface. The Layer 2 Ethernet frame is then forwarded using the LSI interface
to the correct VPLS routing instance.
NOTE: In VPLS documentation, the word Router in terms such as PR Router
is used to refer to any device that provides routing functions.
Label-switched interfaces configured with the
supported with GRE tunnels.
NOTE: Although visible in the CLI, the
supported on DPC cards at the
protocols vpls static-vpls]
routing-instances routing-instance-name protocols vpls]
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring VPLS Without a Tunnel Services PIC on page 55
Configuring Static Pseudowires for VPLS on page 59
Configuring EXP-Based Traffic Classification for VPLS on page 85
Chapter 13: Configuration Statements
no-tunnel-services
no-tunnel-services
[edit logical-systems logical-system-name
and the
[edit logical-systems logical-system-name
statement are not
statement is not
hierarchy levels.
145