Assigning Routing Instances To Vpls; Configuring Vpls Routing Instances; Configuring Vpls - Juniper EX9200 Features Manual

CHAPTER 4

Assigning Routing Instances to VPLS

Configuring VPLS Routing Instances

Copyright © 2016, Juniper Networks, Inc.
Configuring VPLS Routing Instances on page 21
Configuring VPLS Fast Reroute Priority on page 36
Specifying the VT Interfaces Used by VPLS Routing Instances on page 38
Understanding PIM Snooping for VPLS on page 38
VPLS Label Blocks Operation on page 40
Configuring the Label Block Size for VPLS on page 44
PE Router Mesh Groups for VPLS Routing Instances on page 44
To configure a VPLS routing instance, include the
vpls {
active-interface {
any;
primary interface-name;
}
connectivity-type (ce | irb | permanent);
control-word;
encapsulation-type encapsulation-type;
interface-mac-limit limit;
import-labeled-routes [ routing-instance-name ];
label-block-size size;
mac-table-aging-time
mac-table-size size;
neighbor neighbor-id;
no-control-word;
no-tunnel-services;
site site-name {
active-interface {
any;
primary interface-name;
}
interface interface-name {
interface-mac-limit
}
mesh-group mesh-group-name;
multi-homing;
vpls
time;
limit;
statement:
21