Juniper EX9200 Features Manual page 40

VPLS Feature Guide for EX9200 Switches
22
site-identifier identifier;
site-preference preference-value {
backup;
primary;
}
}
site-range number;
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
}
tunnel-services {
devices device-names;
primary primary-device-name;
}
vpls-id vpls-id;
}
You can include this statement at the following hierarchy levels:
[edit routing-instances routing-instance-name protocols]
[edit logical-systems logical-system-name routing-instances routing-instance-name
protocols]
NOTE: ACX Series routers do not support the
hierarchy.
NOTE: You cannot configure a routing protocol (OSPF, RIP, IS-IS or BGP)
inside a VPLS routing instance (
this configuration.
The configuration for the VPLS routing instance statements is explained in the following
sections:
Configuring BGP Signaling for VPLS on page 23
Configuring LDP Signaling for VPLS on page 28
Configuring VPLS Routing Instance and VPLS Interface Connectivity on page 31
Configuring the VPLS Encapsulation Type on page 31
Configuring the MPLS Routing Table to Leak Routes a Nondefault Routing
Instance on page 32
Configuring the VPLS MAC Table Timeout Interval on page 32
Configuring the Size of the VPLS MAC Address Table on page 33
Limiting the Number of MAC Addresses Learned from an Interface on page 34
Removing Addresses from the MAC Address Database on page 35
[edit logical-systems]
). The Junos CLI disallows
instance-type vpls
Copyright © 2016, Juniper Networks, Inc.