Juniper EX9200 Features Manual page 195

Step-by-Step
Procedure
Copyright © 2016, Juniper Networks, Inc.
When configuration is deactivated, it appears in the configuration with the
tag.To reactivate trace operations, use the
[edit protocols bgp group internal-peers]
user@host:A# show
type internal;
inactive: traceoptions {
file bgp-log size 10k files 2;
flag update detail;
flag all;
}
local-address 192.168.6.5;
export send-direct;
neighbor 192.163.6.4;
neighbor 192.168.40.4;
To reactivate trace operations, use the
10.
[edit protocols bgp group internal-peers]
user@host:A# activate traceoptions
user@host:A# commit
Deactivating and Reactivating Trace Logging
To deactivate and reactivate the trace file:
When you are finished troubleshooting, consider deactivating trace logging to avoid
1.
an unnecessary impact to system resources.
[edit protocols bgp group internal-peers]
user@host:A# deactivate traceoptions
user@host:A# commit
When configuration is deactivated, the statement appears in the configuration with
the inactive tag.
[edit protocols bgp group internal-peers]
user@host:A# show
type internal;
inactive: traceoptions {
file bgp-log size 10k files 2;
flag update detail;
flag all;
}
local-address 192.168.6.5;
export send-direct;
neighbor 192.163.6.4;
neighbor 192.168.40.4;
To reactivate logging, use the
2.
[edit protocols bgp group internal-peers]
user@host:A# activate traceoptions
user@host:A# commit
Chapter 14: Operational Commands
configuration-mode statement.
activate
activate configuration-mode statement.
configuration-mode statement.
activate
inactive
177