Local-Switching (Vpls) - Juniper EX9200 Features Manual

local-switching (VPLS)

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Configuring RSVP Automatic Mesh
local-switching;
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
vpls mesh-group mesh-group-name],
[edit routing-instances routing-instance-name protocols vpls mesh-group mesh-group-name]
Statement introduced in Junos OS Release 9.3.
Allows you to terminate multiple Layer 2 circuit pseudowires at a single VPLS mesh group.
Note that when using
vpls-id-list
of traffic (including BUM traffic) between multiple pseudo wires. Enabling local-switching
also eliminates the need to have a dedicated mesh-group for each LDP spoke pseudo
wire (which has a limit of 14).
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring Switching Between Pseudowires Using VPLS Mesh Groups on page 17
Chapter 13: Configuration Statements
, you can enable local-switching to allow local switching
135