Vpls (Routing Instance) - Juniper EX9200 Features Manual

VPLS Feature Guide for EX9200 Switches

vpls (Routing Instance)

Syntax
166
vpls {
mac-pinning;
active-interface {
any;
primary interface-name;
}
community COMM;
connectivity-type (ce | irb);
control-word;
encapsulation-type ethernet;
ignore-encapsulation-mismatch;
ignore-mtu-mismatch;
import-labeled-routes [ routing-instance-name ];
interface interface-name;
interface-mac-limit limit;
label-block-size size;
mac-flush [ explicit-mac-flush-message-options ];
mac-table-aging-time time;
mac-table-size size;
mesh-group mesh-group-name {
interface interface-name;
l2vpn-id (as-number:id | ip-address:id);
local-switching;
mac-flush [ explicit-mac-flush-message-options ];
neighbor address {...};
peer-as all;
pseudowire-status-tlv hot-standby-vc-on;
route-distinguisher (as-number:id | ip-address:id);
vpls-id number;
vrf-export [ policy-names ];
vrf-import [ policy-names ];
vrf-target {
community;
import community-name;
export community-name;
}
}
mtu mtu;
no-control-word;
no-tunnel-services;
site site-name {
active-interface interface-name {
any;
primary preference-value;
}
best-site;
interface interface-name {
interface-mac-limit limit;
}
mesh-group mesh-group-name;
multi-homing;
site-identifier identifier;
Copyright © 2016, Juniper Networks, Inc.