Setting Devices (Except For Annunciators) (Set) - Mitsubishi MELSEC QS Series Programming Manual

5.3.5

Setting devices (except for annunciators) (SET)

SET
SET
Function
(1) When the execution command is turned ON, the status of the designated devices becomes
as shown below:
Bit device
When Bit Designation has been Made for Word Device
(2) Devices turned ON by the instruction remain ON when the same command is turned OFF.
Devices turned ON by the SET instruction can be turned OFF by the RST instruction.
X5
X7
(3) When the execution command is OFF, the status of devices does not change.
Command
: Bit device number to be set (ON)/Word device bit designation (bits)
D
Internal Devices
Set
Data
Bit Word
D
(Except
T, C)
Device
Command
SET Y10
RST Y10
Command
Constants Others
––
Device Status
Coils and contacts turned ON
Designation bit set at 1
ON
X5 OFF
X7 OFF
ON
Y10 OFF
5.3.5 Setting devices (except for annunciators) (SET)
SET
SET D
ON
5.3 Output Instruction
5-27
5