Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 82

10
On the [Print Chart] screen, set the
[Copies] and [Paper Tray]. After setting,
click [Print].
11
Click [Start].
12
When the following message is displayed, place the instrument flat on the calibration
dock and click [OK].
For FD-5BT, click [OK] while you press down the FD-5BT.
13
Stack 10 sheets of blank paper whose type is the same as that of the paper where
chart has been printed, and place the printed chart on top of it.
14
When the following message is
displayed, click [OK].
3-41