Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 31

10
Press [Exit Print Mode].
11
Press [2. Scan Adjustment Chart].
The [Scan Adjustment Chart] screen is displayed.
12
Place an adjustment chart on the original glass.
Open the ADF, then place an adjustment chart with the front side facing up (not facing the original
glass), setting the top side flush with the far end of the glass. Place the upper-left corner of the
adjustment chart approximately 2 inches (approximately 5 cm) away from the vertical size guide and
horizontal size guide respectively on the original glass making sure that the left and top sides are
parallel to the vertical size guide and horizontal size guide respectively.
bizhub PRESS C1100/C1085
2-19
2