Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 78

17
Likewise, measure rows B to Q.
The measured parts are color-displayed on the
screen in the same way as for the chart.
18
After you finish the chart measurement,
click [Next].
After the message, [Calculating] is displayed, the
[Operation steps] screen is displayed.
19
Click [Next] and perform the rest of the
measurement by following the
instructions on the screen.
Perform the rest of the measurement with the
same procedures, in order of "2. The 1st
enhancement of a correction table (FB1)", "3. The
2nd enhancement of a correction table (FB2)", "4.
The 3rd enhancement of a correction table (FB3)",
and "5. The accuracy measurement of FB3".
20
After the measurement of the "5. The
accuracy measurement of FB3", click
[OK] on [Operation steps] screen.
3-37