Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 62

20
Click [Density Balance...].
21
Enter the 14-digit identification number
that is printed to the chart in [Print ID].
Example: 4025513011E66C
22
Enter a filename in [Addendum].
23
Save the measurement data to the USB memory or the machine.
Destination to save
USB Memory
Computer on the network
Tips
The administrator password is required when you save to this machine. Contact your machine administrator for
the administrator password.
Reference
When you save in a USB memory, go to "Added procedures of Density Balance Adjustment (Registration of color
measurement data using a USB memory)"
3-21
Description
Connect the USB memory to the computer, and click [Storage location]
and [Select...].
Create a folder, "\C1100\ADJUST_DATA", in the root (immediately be-
low) of the USB memory, and specify the place as the destination to
save.
Finally, click [Send].
Connect the computer to the same network as the machine, and move
on to the next step.
(Page 3-24).