Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 70

5
Press [Next].
6
Check that the [Switch Color(1st or 2nd)]
is configured to [Precise].
NOTICE
Select [Precise] or [Normal] depending on the situation.
- When you select [Precise], both the 1st color (YMCK)
and the 2nd color (RGB) are corrected.
When you want to prior the quality, select [Precise].
- When you select [Normal], only the 1st color (YMCK)
is corrected. Select [Normal] when you want to
reduce the amount of paper you use for color density
control.
7
Press [OK].
8
Press [Close].
3-29