Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 10

11
Moisten the hydro-wipe (non-woven
fabric without fluff) with isopropyl
alcohol, and clean the dirt of the fusing
unit entrance guide.
12
Hold the lever [M8], and open the paper
path of the duplex unit.
13
Moisten the hydro-wipe (non-woven
fabric without fluff) with isopropyl
alcohol, and clean the dirt of the paper
path of the duplex unit.
14
Hold the lever [M9] and open the jam
processing guide. Then, moisten the
hydro-wipe (non-woven fabric without
fluff) with isopropyl alcohol, and clean the
dirt of the paper path inside the guide.
15
Close the jam processing guide, and close the duplex unit.
16
Push the duplex section into the main body, and move the lever [M1] to the initial
position.
17
Close the left door and the right door of the main body
1-5