Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 22

14
Output the front side adjustment chart again, and check the length of [2], [4], [6], and
[8] of the charts that are output as the second and third sheet.
Repeat from step 11 to step 14 until the length of [2], [4], [6], and [8] are within the range of the following
values.
[2]: 200mm±0.3mm
[4]: 200mm±0.3mm
[6]: 200mm±0.3mm
[8]: 200mm±0.3mm
15
Press [OK] to exit the adjustment.
2-10