Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 32

13
Place the background sheet on the original glass, then close the ADF.
Place the black side of the background sheet facing down (facing the original glass), then set it flush
with the vertical size guide and horizontal size guide as shown below. Exercise care to ensure the
previously set adjustment chart is not misaligned.
14
Press [Start] on the [Scan Adjustment
Chart] screen.
The adjustment chart is scanned.
When scanning is properly completed, the
counter of [Number of Scanning] on the Scan
Adjustment Chart screen is added by one, and
the blue frame displayed in the illustration on
the screen shifts to the next one on the right
side.
- If you move the adjustment chart before the
blue frame shifts to the next, the
measurement may not be performed
properly.
- If the ADF is open, scanning fails, and a
message is displayed. Close the ADF, then
press [Close] in the message dialog box.
- If scanning fails, a message may be
displayed. Follow the on-screen instructions
to correctly place the adjustment chart and
background sheet, then press [Close].
- If you press [Return] on the Scan Adjustment
Chart screen during scan measurement, a
message is displayed to confirm whether to
interrupt the scan measurement. To discard
the previous measurement result, press [Yes].
Retry the scanning process from the first scan
measurement. When continuing scan measurement, press [No].
2-20