Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 63

24
Click [Printer], and click [+].
Tips
If you have added the machine as the destination to save,
select the machine from [Printer].
25
Enter the information of the machine, and
click [Add].
- [Name]: Any name
- [Password]: Administrator password
- [IP Address]: The IP address of the machine
- [Port]: 30091 (when IC-602 is used), 80 (when
EFI controller is used)
26
Click [Send].
Tips
If [Add] has not finished successfully, the lamp remains
red.
27
When the following message appears,
click [OK].
When a message that is not the following appears,
check the information of [Add] again.
28
Press [Density Balance Data Reg/Del] on
the [Density Balance Adjustment Menu]
screen to display the [Density Balance
Adj. Data Register/Del] screen.
bizhub PRESS C1100/C1085
3-22
3