Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 16

6
Slide the side guide plates on both sides, and press the side guide plates against the
paper.
7
Turn the bottom plate fixing knob
counterclockwise to loosen it, slide it to
the front, and turn it clockwise to fix the
plate.
8
Return the tray to its original position, then withdraw it again after the bottom plate of
the tray goes up completely.
The sound of motor elevating the bottom plate can be heard when the tray is returned in position. After
that automation is completed, again withdraw the tray to find that the bottom plate has been elevated to
the top position.
NOTICE
- Be sure not to withdraw the tray till the motor sound stops. Otherwise, the later operation may be affected
because the bottom plate is not elevated completely to the top.
- Adjust so that the scale marks of the front side and the back side become the same value.
9
Fix the position of the top edges of the
side guide plates.
Move top edges of the side guide plates to align
them to the paper, then turn the two side guide
fixing knobs clockwise to fix the guides.
NOTICE
- Avoid making the space between the side guide
plates too wide or too narrow for the paper to be
seated straight.
- Adjust so that the scale marks of the front side and
the back side become the same value.
2-4