Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 60

13
Click [Color Care - Job 0 - C1070 C1100
- density balance]. Then, click [FD5bt -
Denbal Type 2sr - 13×6], and click [OK].
If the number of the color patch is 13 x 7, select
[FD5bt - Denbal Type 2sr - 13x7].
14
When the following message appears,
place the FD-5BT on the white
calibration plate, and press the FD-5BT.
15
When the following message is
displayed, click [OK].
16
Stack 10 sheets of blank paper whose
type is the same as that of the paper
where chart has been printed, and place
the printed chart on top of it.
Make sure that the arrow of the chart points up
when you place the charts.
3-19