Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 54

24
From the [File] menu, select [Save As].
NOTICE
If you use [Export Lab], an error occurs when registering
the color adjustment data. When saving the data, always
use [Save As].
25
Specify the destination to save.
Specify USB memory or the computer connected to the machine via the network.
Destination to save
USB Memory
Computer on the network
26
Enter the file name to save the measured
data and click [Save].
Specify the "14-character identification number
printed on the chart" + "_" (underscore) +
"character string of up to 21 characters."
Example: 30255160110D27_2014-07-25.txt
Reference
When you save in a USB memory, go to "Added
procedures of Density Balance Adjustment (Registration
of color measurement data using a USB memory)"
3-24).
27
On the computer on the network where the measured data has been saved, open a
Web browser.
28
In the URL field, enter "http://IP address
of the machine (or the host name):30091"
and press the Enter key.
If the controller of EFI is implemented, ":30091" at
the end of the IP address is unnecessary.
3-13
Description
Connect the USB memory to the computer.
Create a folder, "\C1100\ADJUST_DATA," in the root (immediately be-
low) of the USB memory, and specify the place as the destination to
save.
Open the computer connected to the network used by the machine, and
specify a desired folder.
(Page