Konica Minolta BIZHUB PRESS C1100 Daily Maintenance Manual page 25

8
Measure the back side image difference
at each point from [a] to [d] that is
positioned at the [back] side of the
second and third output charts.
- The scale resolution is 0.5 mm.
- The black line in the figure shows the back
side, and the blue dashed line shows the
other side (front side).
- The measurement value can be entered in
units of up to 0.1 mm.
- For example, as this figure shows, when the
black line at the back side is shifted by 1.5
mm to the plus direction than the blue dashed
line at the front side, input -1.5 and correct the
difference. Then, the black line at the back
side 1.5 mm is moved to the minus direction.
- Write down the measured values so that you
do not forget them.
bizhub PRESS C1100/C1085
2-13
2