Table of Contents
Advertisement
TURBO HYDRA-MATIC 3 5 0 TRANSMISSION
7A3-37
DIRECT CLUTCH DRUM
\
STEEL SEPARATOR.
/
PLAYES
7
DIRECT CLUTCH
PISTON ASSEMBLY
RETAINING RING
FACED PLATE
DIRECT CLUTCH PRESSURE PLATE@
RETAINING R l U G
4916
Fig. 7A3-83.Direct
Clutch
Assembly
-
Exploded View
CAUTION: I F ROLLER FALLS OUT DURING ASSEMBLY OPERATION-REINSTALL
ROLLER
FROM INSIDE TO OUTSIDE CAGE DIRECTION TO A V O I D BENDING SPRING
INTERMEDIATE CLUTCH
OVERRUN OUTER RACE
(LOCKS O N CLOCKWISE ROTATIONI
/
r
RETAINER
DIRECT CLUTCH
D R U M
A N D INTERMEDIATE CLUTCH
OVERRUN INNER C A M
L P o s I T I o N WITH 4 HOLES
TOWARD FRONT O F TRANSMISSION
2761
Fig. 7A3-84 Intermediate Overrun
Clutch
-
Exploded View
B. Wipe steel plates dry and check for heat discoloration.
4. Remove spring retainer and springs by compressing
If the surface is smooth and an even color smear is indicated,
with a ram press.
the plates should be reused. If severe heat spot discoloration
or surface scuffing is indicated, the plates must be replaced.
5. Inspect the return springs. Evidence of extreme heat
or burning in the area of the clutch may have caused the
Advertisement
Table of Contents
