Table of Contents
Advertisement
7A3-26
1977 PONTIAC SERVICE MANUAL
Fig. 7A3-43 lntermediate Servo Piston Assembly
Fig. 7A3-45 Removing lntermediate Clutch Plates
Fig. 7A3-44 Removing Pump ~ r o m Case
Removal or Input Ring Gear
1. Remove forward clutch housing to input ring gear
front thrust washer. Inspect for excessive wear or scoring.
Fig. 7A3-46 lntermediate Overrun Brake Band
2. Remove input ring gear (Fig. 7A3-48).
Removal of Output Carrier Assembly
1. Remove input ring gear to output carrier needle thrust
bearing.
2. Remove output carrier to output shaft snap ring and
discard (Fig. 7A3-49).
3. Remove output carrier assembly.
REMOVAL OF SUN GEAR DRIVE SHELL,
LOW A N D REVERSE CLUTCH SUPPORT
ASSEMBLY, LOW AND REVERSE
CLUTCH PLATES AND REACTION
CARRIER
Removal of Sun Gear Drive Shell Assembly
1. Remove sun gear drive shell assembly (Fig. 7A3-50).
Advertisement
Table of Contents
