TURBO HYDRA-MATIC 2 5 0 TRANSMISSION
7A2-3 1
Fig.
7A2-65
Removing
Oil
Pump Hub Lip Seal
O D '
-WOOD
BLOCKS
4408
Fig.
7A2-66
Installing Oil Pump Hub Lip Seal
4. Remove direct clutch piston assembly.
5. Remove direct clutch piston outer seal and inner seal
(Fig. 7A2-74).
6. Remove direct clutch piston center seal on drum (Fig.
7A2-75).
Inspection
1. Inspect drive and driven clutch plates for signs of
burning, scoring or wear.
2. Inspect seventeen (17) springs for collapsed coils or
signs of distortion.
Fig.
7A2-67
Installing Pump Drive and Driven Gears
3. Inspect piston for cracks.
4.
Inspect clutch housing for wear, scoring, open oil
passages and free operation of ball check.
Reassembly
I. Install new direct clutch piston outer seal and inner
seal.