How To Install Or Remove A Slot Cover; Installing A Slot Cover - Cisco ASR 14000 Series Installation Manual

Router 8-slot line card chassis
Hide thumbs Also See for ASR 14000 Series:
Table of Contents

Advertisement

Chapter 4
Installing and Removing MSCs, PLIMs, and Associated Components
Figure 4-11

How to Install or Remove a Slot Cover

This section contains the following procedures:

Installing a Slot Cover

This section describes how to install a slot cover in the Cisco ASR 14000 series 8-slot line card chassis.
The chassis is shipped with slot covers over the switch fabric card and RP card slots; we advise installing
slot covers over any empty slots in the chassis. Both slot cover types are installed in the same manner.
(Figure 4-12
covers, see the
OL-16973-01
Cable Management Bracket
Installing a Slot Cover
Removing a Slot Cover
shows a switch fabric slot cover for reference.) For more detailed information on the slot
"Information About Impedance Carriers and Slot Covers" section on page
Cisco ASR 14000 Series Router 8-Slot Line Card Chassis Installation Guide
How to Install or Remove a Slot Cover
4-6.
4-13

Advertisement

Table of Contents
loading

Table of Contents