Cisco ASR 14000 Series Installation Manual page 78

How to Install or Remove a Switch Fabric Card
Required Tools and Equipment
You need the following tools and part to perform this task:
•
•
•
Steps
To install a switch fabric card, see
Figure 4-19 Installing a Switch Fabric Card
1
2
1 Captive screw
2
Ejector lever
Attach the ESD-preventive wrist strap to your wrist and connect its leash to an ESD connection socket
Step 1
on the rear (MSC) side or a bare metal surface on the chassis.
Remove the switch fabric card from its antistatic packaging.
Step 2
Cisco ASR 14000 Series Router 8-Slot Line Card Chassis Installation Guide
4-26
ESD-preventive wrist strap
Large Phillips screwdriver
Switch fabric card (Cisco Product number ASR14K-8-FC/S=)
3
3
Chapter 4 Installing and Removing MSCs, PLIMs, and Associated Components
Figure 4-19 and follow these steps:
Direction of installation or removal
OL-16973-01