How To Install Or Remove Air Circulation Components; Installing A Lower Fan Tray - Cisco ASR 14000 Series Installation Manual

How to Install or Remove Air Circulation Components

Figure 3-1
Air filter
Air enters
PLIM side
The Cisco ASR 14000 series 8-slot line card chassis airflow volumes are:
•
•
How to Install or Remove Air Circulation Components
This section contains the following procedures:
•
•
•
•
•
•
•
•

Installing a Lower Fan Tray

This section describes how to install a fan tray in the lower fan tray slot of the Cisco ASR 14000 series
8-slot line card chassis. For information on the chassis airflow and circulation, see the
Chassis Airflow" section on page
see Regulatory Compliance and Safety Information for the Cisco ASR14000 Series Aggregation Services
Router.
Cisco ASR 14000 Series Router 8-Slot Line Card Chassis Installation Guide
3-2
Airflow through the Cisco ASR 14000 Series 8-Slot Line Card Chassis
Front
Power system
Chassis airflow: Up to 900 cubic feet (25,485 liters) per minute
Power system airflow: Up to 240 cubic feet (6,800 liters) per minute
Installing a Lower Fan Tray
Removing a Lower Fan Tray
Installing an Upper Fan Tray
Removing an Upper Fan Tray
Installing the Chassis Air Filter
Removing the Chassis Air Filter
Installing a Power Module Air Filter
Removing a Power Module Air Filter
Chapter 3
Rear
Fan
Fan
Air exits MSC and
fabric card side
3-1. For complete information on regulatory compliance and safety,
Installing and Removing Air Circulation Components
"About Line Card
OL-16973-01