Cisco ASR 14000 Series Installation Manual page 89

Chapter 4 Installing and Removing MSCs, PLIMs, and Associated Components
Use the cable management bracket to slide cards from the card carrier. Do not lift cards by the cable
Caution
management bracket! Rotate cards onto their vertical axes, then lift them from the bottom, using the
cable management bracket only as an aid for balance.
Required Tools and Equipment
You need the following tools and part to perform this task:
•
•
•
Steps
To remove an MSC, see
Figure 4-26 Removing an MSC
1
2
1 Captive screw
2
Ejector lever
OL-16973-01
ESD-preventive strap
Medium flat-blade or Phillips screwdriver
Impedance carrier (Cisco Product number ASR14K-MSC-IMPEDENCE=)
Figure 4-26
3
3
and follow these steps:
Direction of installation or removal
Cisco ASR 14000 Series Router 8-Slot Line Card Chassis Installation Guide
How to Install or Remove an MSC
4-37