4.2
Commissioning PROFIBUS
4.2.1
General information about commissioning
Interfaces and diagnostic LEDs
A PROFIBUS interface with LEDs and address switches is available as standard
on the Control Unit.
PROFIBUS
interface
PROFIBUS
diagnostic LED "DP1"
PROFIBUS
address switches
Fig. 4-5
S PROFIBUS interface
The PROFIBUS interface is described in the following documentation:
References:
S PROFIBUS diagnostic LEDs
For a description of the diagnostic LEDs –> Subsection 6.1.1.
E Siemens AG, 2004. All rights reserved
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition
Control Unit
Interfaces and diagnostic LEDs
/GH1/
SINAMICS S120 Equipment Manual
Control Units and Additional System Components
Communication via PROFIBUS
Commissioning PROFIBUS
4-83