Measuring Sockets - Siemens SINAMICS S120 Installation And Start-Up Manual

Diagnosis
Diagnostics using STARTER
6.2.4

Measuring sockets

Description
The measuring sockets are used to output analog signals. Any interconnectable
signal can be output to any measuring socket on the Control Unit.
Caution
The measuring sockets should be used for commissioning and servicing purposes
only.
The measurements may only be carried out by properly trained specialist
personnel.
Fig. 6-10
6-212
Measuring sockets j 2 mm
TO
T1
T2
M
Arrangement of the measuring sockets on the Control Unit 320
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition
Meas. socket 0
Meas. socket 1
Meas. socket 2
Measuring signal
Reference
(with default scale setting)
4.98 V
8 0 % of
2.49 V
measuring signal
0 V
E Siemens AG, 2004. All rights reserved