General Information About Sinamics Safety Integrated - Siemens SINAMICS S120 Installation And Start-Up Manual

SINAMICS Safety Integrated (Booksize)

General information about SINAMICS Safety Integrated

5.1 General information about SINAMICS Safety Integrated
5.1.1 Explanations, standards, and terminology
Safety Integrated
The "Safety Integrated" functions, which have been prototype tested, provide high-
ly-effective application-oriented protection for personnel and machinery.
This innovate safety technology offers the following benefits:
S Increased safety
S More economic operation
S Greater flexibility
S Higher level of plant availability
The following Safety Integrated (SI) functions are available:
S Safe standstill (SH)
"Safe standstill (SH)" is a function that helps prevent the drive from restarting
unexpectedly (to EN 602041, Section 5.4.).
S Safe Brake Control (SBC)
Note
These functions are drive autonomous, that is, no higher-level controller is
required.
5-148
E Siemens AG, 2004. All rights reserved
SINAMICS S120 Installation and Start-Up Manual, 12/04 Edition