Table of Contents
Advertisement
Installing the switch
The following sections shows how to install the switch. The switches come with an accessory kit that includes the
brackets for mounting the switch in a standard 19-inch telco rack or in an equipment cabinet. Also included are
rubber feet that can be attached so the switch can be securely positioned on a horizontal surface. The brackets are
designed to allow mounting the switch in a variety of locations and orientations. For other mounting options, contact
your local Hewlett Packard Enterprise authorized network reseller or Hewlett Packard Enterprise representative.
Shipping the switch in a rack
If the switch is to be shipped in a rack, it can be mounted and shipped in a Hewlett Packard Enterprise Universal
Rack.
This method uses the HPE X410 Universal Rack Mounting Kit (J9583A).
n
To order the J9583A rack mounting kit, contact your HPE Aruba Networking sales representative.
n
Included parts
The 6300M switches have the following components shipped with them:
A USB-C to USB-A console cable can be ordered separately, or as an accessory to your switch. JL482A - X472 2-Post Rack
Kit can be ordered separately, or as an accessory to your switch.
Documentation kit
n
Accessory kit (5400-3445) containing:
n
two mounting brackets
o
eight 8-mm M4 screws to attach the mounting brackets to the switch
o
four 5/8-inch number 12-24 screws to attach the switch to a rack
o
four rubber feet
o
Power cord, one of the following (included with power supply unit):
n
HPE Aruba Networking 6300M PoE Switches (with AC power supplies)
North America
North America high line
South Africa/India
Israel
United Kingdom/Hong
Kong/Singapore/Malaysia
HPE Aruba Networking CX 6300 Switch Series | Installation and Getting Started Guide
8121-0973
Australia
8121-0941
Brazil
8121-1483
Europe/South Korea
8121-1009
China
8120-5334
Argentina
Chapter 3
Installing the switch
8121-0857
8121-1265
8120-5336
8121-1034
8121-1481
25
Advertisement
Table of Contents
