Job Properties - Toshiba e-studio 45 Operator's Manual

1
1-38 About the Command WorkStation (Option)
4. Enter a name for the new template and click OK.
The new template is saved in the Templates pop-up menu in the Filter dialog box.
To view jobs in the Queues, Archive, FreeForm, and Job Log windows according to a
filter template, open the Filter dialog box, choose the template by name from the
Templates pop-up menu, and click OK.
To delete an existing template, open the Filter dialog box, choose the template by name
from the Templates pop-up menu, and click Delete. Click OK to confirm that you
want to delete the template.

Job properties

When logged in as Operator or Administrator at the Command WorkStation, you can
use the Properties command to check and override the print option settings
(properties) of most jobs.
You cannot override the print option settings of PCL jobs.
N :
OTE
You can use this command to:
• Check a user's job settings, especially notes and instructions.
• Override a setting based on printed output or other print device conditions.
• Change settings for a duplicate of the original job.
• Print a single copy of a job before printing the number of copies required
by the user.