Toshiba e-studio 45 Operator's Manual page 104

3
3-20 DocBuilder Pro (option)
3. Hold the test page up to a strong light source and choose the coordinates at which the
two grids are best aligned.
For example, the grids may be best aligned at a point which is D on the horizontal axis
and 4 on the vertical axis.
4. Select the coordinates in the dialog box in the Shift value area.
The horizontal and vertical coordinates are each selected from a separate pull-down
menu.
5. Click Apply.
Duplex Alignment is specific to a page size and the paper source. For example, if
N :
OTE
you perform a Duplex Alignment for the Letter size paper in Upper Tray and then
print a job from Lower Tray on Letter size paper, the Duplex Alignment will not apply.
You must perform Duplex Alignment for each combination of page size and paper
source that you will be using.